ALLPRO High Solid Self-Leveling Epoxy Coating Kit

AllPro 100% Solids Self-Leveling Epoxy Floor Coating is a two-component, hi-performance chemical resistant gloss epoxy specially formulated for applications where a high build, seamless, and abrasion resistant floor is required. It provides a low VOC and low odor gloss coating with excellent chemical, abrasion, and stain resistance. It can be applied in a solid color or used as a primer and color basecoat for chip or quartz decorative floors.

Recommended Substrates

• Interior properly prepared concrete floors
  
• Warehouses, kitchens, restroom, and garage floors
  

Product Features

• Finished product or color basecoat for chip or quartz decorative floors
  
• Scrub & abrasion resistant
  
• Chemical & solvent resistant
  
• Low VOC and low odor
  
• High build - up to 24 mils
  
• Integrated cove base with Thixo additive
  
• Can be mixed with aggregate to create a slurry up to 1/4” thickness

Product Limitations

• Recommended air, product & substrate temperatures 59° - 86° F and <85% RH.
  
• Not recommended for exterior use as accelerated chalking & fading will occur.
  
• Expect longer dry times at lower temperatures & low relative humidity
  
• The color of this product may be affected by high humidity, low temperatures, chemical exposure, and/or exposure to lighting such as sodium vapor lights.
  
• The moisture content of the concrete must be less than 4%.
  
• High performance (soft) tires may stain finish (plasticizer migration)
  
• Always test floor cleaners for ill effects before widespread use.
  

Packaging Information: 3 Gallon Kits | 15 Gallon Kits are Special Order Only
Mix Ratio by Volume: 2 Parts A to 1 Part B
Flash Point: 199.4°F Non-Flammable
Clean Up: Xylene for tools or if coating has dried.
Dawn® or similar grease cutting dish soap for hands and skin.

TDS

file:///C:/Users/Dell%20PC/Downloads/AP91000-A_AP91002-A5_AP91001-A_AP91010-B_AP91009-B5%20AllPro%20Epoxy_PDS%20250112%20(1).pdf